How to make a larp boffer roman gladius

The Roman gladius does hold a few more target specific points to be given a separate tutorial here.

So what can be said about it  in one sentence. If you are looking for a short stabbing sword meant for fighting with big shield in formation then you need a gladius. They come in several basic types, though most of the variation comes from blade shape which cannot be readily replicated. Size is between 60-70-80 sm long, depending on the type.

So Larp boffer Gladius - materials list

The usual gig - polypropylene pipe F25, tapes, foam, some glue and hemp string in this case.

The tools list is usual and so is the price tag attached. I'm not going to repeat it every single time after all.

Now the specific point about the gladuis is that it's meant mostly for stabbing. Therefore the tip needs to be made a bit differently. First I'll soften the edges of the pipe so that they don't damage the foam tip. A champagne bottle cap could go there but I don't have one at the moment.

 After that its grip making time. First I measure it and leave some room for error margin. After all the sword might go in bigger hands than mine.

 Then its business as usual for my current larp sword making technique - the grip is made oval and the pommel goes in. Note that there is no additional counterweight this time, apart from the pommel itself. The gladius is fairly short and light so there is no need for it.

 Usually at this point I add leather to the grip to improve handling. However I decided to do something else this time around.A bit of a cheaper alternative to be accurate.

 

 Simple hemp string is glued to the grip instead of leather. It works just as fine, but at a fraction of the cost.

Sometime later its done and one can start working on the blade itself. 

 

 

In this case the blade is made a bit differently. Its again classic 2 foam layers, however the layers themselves are made from a single length of foam that goes around both ways. 

 One extra layer of foam is added to the tip to soften it more. Both this and the previous step are made exactly with more stabbing in mind. A sharp tip will be flattened in no time anyway.

 Finally one thing the gladuis sometimes lacks - a sword guard. I made it from another piece of left over flip-flop foam. Nothing left to do now but cover the blade.

 All set - you can go stab someone now.